TP-LINK CPE210 V3.2 2.4GHz 300Mbps 9dBi Outdoor CPE


TP-LINK CPE210 V3.2 2.4GHz 300Mbps 9dBi Outdoor CPE




• Built-in 9dBi 2×2 dual-polarized directional MIMO antenna
• Adjustable transmission power by 1dBm
• System-level optimizations for more than 5km long range wireless transmission
• TP-LINK Pharos MAXtream TDMA (Time-Division-Multiple-Access) technology improves product performance in throughput, capacity and latency performance, ideal for PTMP applications
• Centralized Management System – Pharos Control
• AP / Client / Bridge / Repeater / AP Router / AP Client Router (WISP) operation modes
• Passive PoE Adapter supports up to 60 meter (200 feet) Power over Ethernet deployment and allows the device to be reset remotely


ProcessorQualcomm 650MHz CPU, MIPS 24KcMemory64MB DDR2 RAM, 8MB FlashInterface1 10/100Mbps Shielded Ethernet Port (LAN/POE)
1 Grounding Terminal
1 Reset ButtonPower Supply24VDC/0.5A Passive PoE (+4,5pins; -7,8pins)Dimensions (WxDxH)224 x 79 x 60 mmProtection15KV ESD Protection
6KV Lightning ProtectionEnclosureMaterial: Outdoor ASA stabilized plastic
Weatherproof: IPX5 water and dust proof design


Wireless StandardsIEEE 802.11b/g/nProprietary ProtocolTDMA Mode (with Pharos MAXtream enabled)Wireless SpeedsUp to 300Mbps (40MHz,Dynamic)
Up to 144.4Mbps (20MHz,Dynamic)
Up to 72.2Mbps (10MHz,Dynamic)
Up to 36.1Mbps (5MHz,Dynamic)Frequency2.4~2.483GHz
Note: Available operating frequency may vary depending on the limitations of the countries or regions in which the device is used.Transmission Power25dBm/500mW (Adjustable power by 1dBm)
Note: Maximum transmission power may vary across different channels depending on the limitations of the countries or regions in which the device is used.


Wireless ConfigurationsPharos MAXtream TDMA Technology
Selectable Channel Width: 5/10/20/40MHz
Auto Channel Selection
Transmit Power Control
Dynamic Frequency Selection(DFS)
WDS Enable/Disable
Security:WPA/WPA2, WPA-PSK/WPA2-PSK (AES/TKIP)Encryption
64/128/152-bit WEP Encryption
SSID Broadcast Enable/Disable
Multi-SSID with VLAN Tagging (AP mode only)
Distance/ACK Timeout Setting
Wireless MAC Address Filter
Wireless Advanced:
> Beacon Interval/RTS Threshold/Fragmentation
>Threshold/DTIM Interval/AP Isolation/Short GI/Wi-Fi MultimediaNetwork ConfigurationsWAN: Static/Dynamic/PPPoE/L2TP/PPTP
LAN: Static/Dynamic/DHCP
Forwarding: DMZ/ALG/UPnP/Virtual Server/Port Trigger
Security: SPI Firewall/ Ping Forbidden/VPN/DoS Protection Access Control
Static Routing
Bandwidth Control
IP & MAC BindingOperation ModesAP/Client/Bridge/Repeater/AP Router/AP Client Router (WISP Client)ManagementDiscovery and Remote Management via Pharos Control application
HTTP/HTTPS Web-based management
System Log
SNMP Agent(v2c)
Ping Watch Dog
Dynamic DDNS
SSH ServerSystem ToolsIndicators:
Signal Strength/Noise/Transmit CCQ/CPU/Memory
Monitors: Throughput/Stations/Interfaces/ARP/Routes/WAN/DHCP
Spectrum Analyzer
Speed Test
TracerouteSystem-level OptimizationsIGMP Snooping/Proxy for multicast applications
Hardware watch dog


CertificationCE, FCC, RoHS, IPX5Package ContentsOutdoor Wireless CPE
24V 0.5A Passive PoE Adapter
Pole Mounting Strap
AC Power Cord
Installation GuideSystem RequirementsMicrosoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 10, Windows 8, Windows 7, MAC OS, NetWare, UNIX or Linux.
Note: We recommend you to use one of following Web browsers for an improved user experience:
Google Chrome, Safari, and Firefox. IE browsers are not recommended.EnvironmentOperating Temperature: -40°C~70°C (-40°F~158°F)
Storage Temperature: -40°C~70°C (-40°F~158°F)
Operating Humidity: 10%~90% non-condensing
Storage Humidity: 5%~95% non-condensing